Quarry Oversight Inspection Checklist – Part 2

By on July 30, 2015
Safety-Banner

The last twelve months have seen Worksafe Victoria develop a comprehensive Quarry Oversight Inspection Checklist. The purpose of the checklist is to develop an internal document to assist inspector’s and while it was provided to the industry for feedback it is never intended to become a ‘top to bottom’ tick the box tool. It is a tool to assist inspectors in focusing their attention on specific topics while at a site.  They would use those areas of the checklist which were relevant to the visit and importantly to the specific quarry site being inspected. If the checklist is to be used by a quarry operator the same would apply. They would only need to use those areas of the tool which is relevant to their site and the checklist could also be modified to meet the specific nature of a quarry. This is the second in a four part series providing a detailed outline of what inspectors may focus on during a visit.

Hazard-table
(See table right as an example of the checklist – blue area shows sample responses).

The following lists are of examples outlining hazard checks which inspectors may focus on during a visit.


tables

About enquiries@cmpavic.asn.au

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

Sponsored Ads