Indeco Supplies 4m Arm and Breaker
The supply of a 4m arm to a HP1500W breaker provided an innovative solution to a technical problem, reports BRUCE MCWILLIAMS, Managing Director of Indeco Australia.
THE Northern Quarries site at Cooper Street, Epping is a basalt quarry producing concrete aggregates and crushed rock including road base. It has been operational for 17 years, and has grown to be a major supplier to a number of large organisations and Government projects as well as small operators.
The quarry produces Class 1, 2 and 3 crushed rock for road construction as well as commercial grade crushed rock for roads and buildings sub-base aggregates are produced for concrete production and drainage purposes.
Northern Quarries built a new primary crusher module. This comprised a single toggle jaw crusher and hydraulically powered reciprocating plate feeder.
They realised that to guarantee high production, any blocking, jamming or bridging of rocks in the jaw or on the feeder must be eliminated.
This necessitated the fitting of a hydraulic arm and breaker assembly to efficiently clear any blockages.
The quarry management proposed that the hydraulic arm and breaker assembly should be part of the overall design of the new primary crusher installation and not just a last minute add on.
Indeco Australia has been a preferred supplier to this quarry for 12 years, a relationship built on quality product supported by experienced service providers and on the shelf parts availability.
Plus Indeco designs each arm individually to ensure the breaker reaches exactly where it is required. Northern Quarries engineer, designing this installation, was introduced to Indeco’s design engineer and they worked together to produce an assembly to meet the quarry manager’s exact requirements.
This resulted in a 4.0 metre arm mounted at the base of the hopper. No expensive mounting tower was required plus it was realised that the hydraulic power pack operating the feeder had enough capacity to also operate the arm assembly.
The end result was a major cost cutting plus two less items to maintain and cause obstruction to overall servicing.
This installation can be operated from the mounting point of the arm which gives an unrestricted view of the crusher jaw or by mobile radio control which can view any blockage from access points or via cameras viewed from the operating cabin.
Safety is a major consideration, greasing and routine servicing is from a central point plus the design does not permit the arm to enter into walkways.
A stop butt on is located at the controls. Plant operator Mark Hutchinson has been impressed by the performance, “It is so quick and simple to use, I actually enjoy operating it and the Indeco HP1500W breaker has adequate power to easily handle any oversize basalt rocks blocking the crusher or feeder.”
For further Information: Email – indeco@indeco.com.au
Telephone – 1800 801 987 Fax – 03 9314 4140.
You must be logged in to post a comment Login